Electric Motors - Page 2 - Extreame Savings! Save up to 48%


Extreame Savings! Up to 48% off on Electric Motors at The Native People, Page 2. Top brands include KNACRO, SainSmart, GE, Delta, PennBarry, JiangYY, A. O. Smith, Q2U LLC, formerly Davelle, uniquegoods, DC GEAR MOTOR, uxcell, OlogyMart, Powertech, LM YN, Tjernlund, DF ROBOT, DuroMax, & V-MAX. Hurry! Limited time offers. Offers valid only while supplies last.



KNACRO PWM DC motor driver 60A DC 12V/24V/36V/48V 10-50V Forward Reverse switch Tachometer brush motor inverted module Metal protective housing Maximum power 3000W
By KNACRO
In Stock
$25.60

ean: 0713653010561,

4.5 out of 5 stars with 69 reviews
Input voltage: DC 10-55V.Output voltage: Load Linear. Input Current: require large than the motor operating current.Output Current: determine load size.Continuous current: 60A within. Maximum power: 3000W.Knob hole: 7mm. Speed type: modulated current.Speed mode: ON OFF linear potentiometer 270 degrees.Speed range: 0-100%. Operating frequency: 15KHZ.Terminal Type: Pressure riveting line terminal. Input voltage: DC9-55V. Output voltage: Load Linear. Input Current: require large than the motor


SainSmart CNC 4-Axis Kit with ST-4045 Motor Driver, USB Controller Card, Nema23 Stepper Motor and 24V Power Supply (CNC Kit 6)
By SainSmart
In Stock
$305.99

mpn: 16050, ean: 6959011581531,

4.3 out of 5 stars with 49 reviews
Description: This is SainSmart new CNC complete kit for engraving DIY. It comes with necessary and basic parts to make your own engraving machine. It is simple and easy to assemble the parts. Specification: ● 4-axis USB CNC Controller Card 100KHz: Support MACH3 and other computer software; with USB interface, easy to use and set up. This can control up to five stepper motor driver. It is easy to tell the input status with LEDs. It needs to use external 24V DC power supply to isolate USB


Ge RAK3152 Zoneline Power Cords, 15 Amp
By GE
In Stock
$47.88

mpn: GID-506487, ean: 0076335142159,

4.6 out of 5 stars with 114 reviews
The correct kit for the installation is determined by the voltage and amperage of the electrical circuit and the means of connecting the unit to the building wiring used with AZ series 2800, 2900, 3800, 3900, 5500 and 5800 only electric heat amps include electric heater and Fan motor current draw. This is manufactured in United States.GE zone line power cords 15a. The correct kit for the installation is determined by the Voltage. This is manufactured in United States.


DELTA 36-835 Motor For 36-851 Feeder
By Delta
In Stock
$937.21
$933.95

mpn: 36-835, ean: 0069554368356,

4.9 out of 5 stars with 61 reviews
The DELTA 36-835 Motor For 36-851 Feeder is designed to function in the DELTA 36-851 1 HP 4-Speed 3-Roller Stock Feeder. This is a single-phase 240-volt two-speed reversing motor.36-835 Motor designed to run in the 36-851 stock feeder. Single-phase 240-volt motor. Two-speed reversing motor. Measures 21 x 11 x 22 inches; weighs 66 pounds.


Penn Vent Power Pack Assembly for old Z8 (Z8S) 115 Volt # 27603-0
By PennBarry
In Stock
$387.69

mpn: 27603-0, ean: 0663001050797,

4.4 out of 5 stars with 86 reviews
Complete fan assembly. Suggested replacement reference for: Penn Vent Power Pack Assembly for old Z8 (Z8S) 115 VoltGENERIC REPLACEMENT. NON-RETURNABLE.


10 x DC 12V Coil DPDT 8 Pin 2NO 2NC Mini Power Relays PCB Type HK19F IND009
By JiangYY
In Stock
$10.49

mpn: HK19F, ean: 0763250747841,

4.2 out of 5 stars with 68 reviews
100% Brand New and High Quality. 8 pins, DPDT type, PCB mount.. Can adjust automatically, protect and transform the electric circuit.. Used widely in the remote control, communication, automatic control system, electronic equipments, etc.. Quantity:10pcs.


Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
By A. O. Smith
SKU: #04102330
In Stock
$99.95

sku: 04102330, mpn: GF2054, ean: 0786674021830,

4.3 out of 5 stars with 73 reviews
Split phase motor, 8.0 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.. Resilient Cradle Base - 1/2'' x 1 1/2'' Diameter Shaft; 3'' Shaft Height. 48 Frame; Rotation - Reversible; Sleeve Bearings. Automatic Overload Protection; Service Factor 1.25. Split phase motor. 1 Year Manufacture Warranty.


NuTone S97017706 Ventilation Fan Motor Assembly
By Q2U LLC, formerly Davelle
In Stock
$46.95

mpn: S97017706, ean: 0026715185054,

4.3 out of 5 stars with 56 reviews
Genuine NuTone S97017706 Motor assembly includes motor and blower wheel. This motor assembly S97017706 works with the following NuTone/Broan ventilation fan models: NuTone 8814R, 8664RP. 100 CFM to quietly ventilate baths up to 95-square feet.100W ceiling light. UL listed for use in tub/shower with GFI branch circuit wiring.Genuine NuTone S97017706 motor assembly includes motor and blower wheel. This motor assembly S97017706 works with the following NuTone/Broan ventilation fan models: NuTone


uniquegoods AC 220V 80A 10000W High Power Digital SCR PWM Motor Speed Controller Voltage Regulator Dimming Control Attemperation Thermoregulation
By uniquegoods
In Stock
$16.98

mpn: UN224, ean: 0675827800289,

4.7 out of 5 stars with 76 reviews
uniquegoods AC 220V 80A 10000W High Power Digital SCR PWM Motor Speed Controller Voltage Regulator Dimming Control Attemperation Thermoregulation Description: Using voltage: AC220V The maximum power: 10000W Voltage regulation: 0-100% (Adjusted 220V in 100 classes , nonlinear) Notes:10000W products are not in proportion to the regulator, so called nonlinear,digits show 0-100. When digit show 1, voltage about 20V,the higher voltage, the more careful between the level and the level


BEMONOC DC 12V DIY Reciprocating Cycle Linear Actuator Adjustable 16 Rpm Speed Optional Kits Speed Controller & Power Supply
By DC GEAR MOTOR
In Stock
$145.88
$138.88
You Save: 5%

mpn: diy&controller&power, ean: 0601490681320,

4.7 out of 5 stars with 90 reviews
Speed Controller Product Description: Input Voltage: DC12-24V; Output current: 10A; Output power: 240W; Voltage range: 5%~100%; PWM Frequency:18KHz; Switching Power Supply Product Description: Output Voltage DC: 12V Voltage Output: +/-1% Output Current Rated: 6A Current Range Output: 0~6A And Noise Wave: 100mVp-p Stability Inlet: +/-0.5% Stability Load: +/-.5% Output Power DC: 75W Efficiency: 78% Range for DC Voltage Adiustable: +/-10% Voltage Input: 100~240V 47~63HZ Current 1.6A/115VAC:


Uxcell Power Tool Motor Carbon Brushes, 5 x 5 x 10mm, 10 Pair
By uxcell
In Stock
$19.08
$10.00
You Save: 48%

mpn: a13032700ux0010, ean: 0700955148603,

4.7 out of 5 stars with 40 reviews
This is a Non-OEM ProductCarbon motor brushes are one of the most commonly used components for power tools,such as electric hammer, electric drill, angle grinder, etc.Worn brushes are often the cause of a poorly running motor.Can be used as replacement parts for various brand power tools as long as the size is suitable Hundreds of carbon brushes are listed in this store ,you can always find the fit-size carbon brushesProduct Name : Carbon Brush;Carbon Brush Size (Approx) : 10 x 5 x 5mm/ 25/64''


51cm 3000PSI Spray Wand Lance for Power Pressure Water Washers 7GPM Spray Wand
By OlogyMart
In Stock
$14.73

mpn: Ologymart2991562580, ean: 0600182768097,

4.8 out of 5 stars with 29 reviews
Description51cm 3000PSI Spray Wand Lance for Power Pressure Water Washers 7GPM Spray WandSpecification:Material: Stainless Steel + BrassLength: about 51cmFitting Model: Fit for Power Pressure Washer Water PumpsQuantity: 1pcFeatures:-Good in quality offering you a different spraying experience-Ordinary design may fit many makes and models that meet your different requirement.Package Include:1pc x 3000 PSI 51cm LanceNotice:1. Please allow a bit error due to manual measurement. please make sure


PowerTech 1415C 1.5 hp 5/8" General Purpose Electric Motor Shaft, Single Phase, 115/230V, 56C Frame, 1750 RPM, TEFC, Manual Overload Protector
By Powertech
In Stock
$225.99

mpn: 1415C, ean: 0635963265465,

4.0 out of 5 stars with 74 reviews
1.5Hp 5/8 inch shaft general purpose electric motor, 1 phase, 115/230V, 56C frame, 1750 RPM, reversible Rotation CW/CCW, TEFC, with manual Overload protector.1.5Hp, 1 phase, 115/230V, 56C frame, 1750 RPM. Reversible rotation CW/CCW, TEFC, with manual overload Protector. Free shipping.


Ge RAK3303A Zoneline Power Cords, 30 Amp, White
By GE
SKU: #506489-BW
In Stock
$58.53
$55.38
You Save: 5%

sku: 506489-BW, mpn: GID-506489, ean: 0076335142173,

4.8 out of 5 stars with 91 reviews
The Correct Kit For The Installation Is Determined By The Voltage And Amperage Of The Electrical Circuit And The Means Of Connecting The Unit To The Building Wiring For Use With The Following AZ Series Units: Az41E09Dab, Az41E12Dab, Az41E15Dab, Az61H09Dab, Az61H12Dab & Az61H15Dab *Electric Heat Amps Include Electric Heater And Fan Motor Current Draw Made in: United States Dimensions: 3.2 X 9.8 X 9.2Brand: GeItem Weight: 6.75includes: Unit Instruction GuideGe Zone line Power Cords 30A. The


LM YN Stepper Motor Controller 0.3K-30K PWM Pulse Output Adjustable DC5-32V Power Supply
By LM YN
In Stock
$13.99

ean: 0612957707866,

4.3 out of 5 stars with 26 reviews
Description: Stepper motor controller, the use of DC 5 ~ 32V power supply, adjustable 0.3K - 30K PWM pulse output. With the stepper motor driver, together with the control of the stepper motor operation. Module parameters: Input voltage: DC 5V ~ 32V Working temperature: -20 ~ 60 ℃ Module size: 70mmm * 45mm * 12mm; Screw hole size: 3.0mm * 4 Port description 1. Signal output connection description VCC: Positive power supply, 5V-32V GND: Negative power supply VOUT: 5.0V output, VCC = 9V: VOUT


Tjernlund 950-0635 Impeller Wheel Kit for SS1, SS1C Sidewall Power Venters
By Tjernlund
In Stock
$47.90
$47.89

mpn: 950-0635, ean: 0080956950635,

4.5 out of 5 stars with 48 reviews
Tjernlund products inception dates back to 1938 when emil Tjernlund and his son Robert started designing and manufacturing oil fired forced air furnaces. From this start their product offering evolved into gas fired furnaces and custom packaged roof top heating & cooling equipment. In the mid 1950's our auto draft inducers were developed to eliminate draft problems associated with short stacks on roof top units. Other people within the heating industry soon saw the advantages of our draft


Gravity: Digital 10A Relay Module Can Withstand 10A High Current Gravity Interface Good Compatibility Weak Current Control And Strong Power Application Plug And Play Without Welding
By DF ROBOT
In Stock
$13.05

mpn: DF-AKV9016, ean: 0666389073556,

4.4 out of 5 stars with 61 reviews
INTRODUCTIONIntroducing the Gravity Digital Relay Module ¨C the latest addition to DFRobot¡¯s Gravity series! This module is a little different to the other relays in our store - not only is it compatible with 5V Arduino boards, but also with Raspberry Pi, BBB (BeagleBoard Black), mbed, Intel Joule, Arduino 101 and other 3.3V devices.SHIPPING LISTGravity: Digital Relay Module (with Acrylic Base) x 1Gravity Digital Sensor Cable x 11.Supports Arduino, Raspberry Pi, Lattepanda .etc.. 2.2.8 ~


DuroMax XP18HPE 18 HP Electric Start Go Kart Log Splitter Gas Power Engine Motor
By DuroMax
In Stock
$485.24

mpn: XP18HPE, ean: 0811640014155,

4.7 out of 5 stars with 41 reviews
The DuroMax XP18HPE is the top of the line powerhouse engine available from DuroMax. It features a 440cc - 4 Stroke Overhead Valve design Engine that has an Electric Start as well as an E-Z Pull Recoil Start. It can cranks out 18HP capable of 21-Ft/Lbs of Torque. The Shaft is 1'' in diameter and 2 ¾'' long, while the end is 3/8'' Size 24 UNF - Drilled and Tapped. Feeding this monster engine is a 1.7 gallon Fuel Tank which at half load can run over 3 hours on a single tank of fuel. The


A.O. Smith B182 5 HP, 3600 RPM, 208-230 Volts, 22 Amps, 56HCZ Frame-3/4-Inch Diameter Shaft, CWOSE Rotation, Ball Bearing Pressure Washer Motor
By A. O. Smith
In Stock
$376.68
$345.97
You Save: 8%

mpn: B182, ean: 0786674012012,

4.8 out of 5 stars with 72 reviews
Pressure washer motor, 60 hertz, manually protected, 14.5-Inch -InchC-Inch dimension.5 HP. 3600 RPM. 208-230 volts.


SPP6 Hard Start Kit for 500% extra torque.1/2-10 Horsepower Range, air conditioner, heat pump & refrigeration HVAC/A/C 115 to 250v, 6000 thru 120,000 btu Replaces Supco SPP6 Capacitor super boost
By V-MAX
In Stock
$17.99

ean: 0680431928557,

4.7 out of 5 stars with 62 reviews
JUST WHAT YOU NEED to Hard Start and Super Boost your HVAC/ Air conditioning  A Truly Efficient Super Starter 500% For 1/2 to 10 HP Air Conditioners- Contains Relay and Start Capacitor for Extra Starting Torque Saves energy and extend compressor's life This capacitor is simple to install with instructions on the package. This Hard Start Kit is also known as the Big Kick, Super Boost, or Super Starter  This is Hard Start Kit Capacitor, a device that combines PTC solid state with a start



Viewing Page 2 of 4

View more products in Electrical.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - thenativepeople.net. All Rights Reserved.